Adhesive films are thin layers thermo-adhesive film of […]
Adhesive films are thin layers thermo-adhesive film of high-performance bonding agents supported by a backing material. Despite their relative thinness, they offer a level of bonding performance similar to fasteners, screws, rivets, and welding for many applications.The backing of adhesive films also known as the carrier may be constructed from several types of materials including paper, plastic, cloth, foil, foam, and more. The backing may be coated with an adhesive on one or both sides and can be integrated with a release liner if required. Adhesive-coated backings are typically wound in rolls and die cut into desired lengths and shapes.
These films can also be formulated with varying adhesive chemical compositions to provide beneficial properties for unique applications.Unlike liquid glues, adhesive films are applied as solids and do not ‘squeeze out’ when compressed between two surfaces. Additionally, since adhesive films contain no liquids, they have no pot life or gel time, allowing them to be stored indefinitely. These attributes make adhesive films ideal for automated processes and industrial applications where time-consuming messes and maintenance issues need to be avoided.The films consist of a pressure-sensitive adhesive compound coated onto a backing material usually on one side. The other side of the backing typically has a release liner to facilitate manual pressure application.
PSAs are tacky at room temperature and can be used to bond a variety of materials, including paper, plastic, metal, and concrete. These adhesives can achieve bonding pressures of up to 30 psi depending on the specific application.PSAs are best applied in environments with temperatures between 59o F and 95o F. Lower temperatures can lead to insufficient wetting or coverage of the adhesive on the substrate. Whereas, extremely high temperatures may cause the adhesive film to stretch or warp during final application.During the cooling process, the microstructure of the adhesive begins to crystallize, significantly increasing the bond strength.
Heat activated adhesives are particularly aggressive and enable the bonding of difficult surfaces, including rubber and polymer-based materials. Heat activated adhesives are also customizable and are available with numerous backing materials.Relatively high bonding strength and superior chemical resistance are major benefits of heat activated adhesives. The cross-linking reactions that take place during the curing of thermoset adhesives result in a rigid bonding structure that is unmatched by pressure sensitive or moisture activated adhesive films.Relatively high bonding strength and superior chemical resistance are major benefits of heat activated adhesives. The cross-linking reactions that take place during the curing of thermoset adhesives result in a rigid bonding structure that is unmatched by pressure sensitive or moisture activated adhesive films.