Thermo Adhesive Film

Pinghu Zhanpeng Hot Melt Adhesive Web & Film Co., Ltd. Pinghu Zhanpeng Hot Melt Adhesive Web & Film Co., Ltd. Pinghu Zhanpeng Hot Melt Adhesive Web & Film Co., Ltd.

PO (Polyolefin) hot melt adhesive film/modified hot melt adhesive film is suitable for bonding aluminum honeycomb panels and aluminum-plastic panels, and is a hot melt functional film made of polyolefin as the main raw material.This type of adhesive film is often used in embroidered badges, carpets, aluminum honeycomb panels, aluminum-plastic panels, etc. bonding.

Film door width 1.5 meters, thickness 0.1-0.4mm

Contact Us


Modified hot melt adhesive film for bonding aluminum honeycomb panels to aluminum-plastic panels

EAA hot melt adhesive film (with paper/without paper)
Product code ZPMO-film001 ZPMO-film002
Supply form film film
0.02-0.2 0.02-0.2
5-1600 5-1600
Melting point
( )
80-90 90-100
Bond strength
>10 >10
** **
Dry cleaning resistance
—— ——
Pressing temperature
120-140 130-150
Pressing time
15-20 15-20
Pressure(kgf/cm2) 0.3-0.5 0.3-0.5
Applicable to Suitable for cotton cloth, aluminum plate, non-woven fabric, aluminum foil, copper foil, denim, embroidered badges, trademarks, handicrafts, aluminum mesh hot stamping, textiles, metal sheets, shoes and hats, textiles, polyester mesh, steel mesh, polyester hair Foam materials, TPV, EPTM, etc.
Note: The pressing conditions are for reference only and are related to the pressing equipment, thickness of the bonded material, and pressure. Users need to confirm experimentally according to specific conditions.
***: Very good **: Good *: OK —: Not recommended NO: No data
Contact us